How to Hang a Quilt

hanging sleeve

This sleeve design protects the quilt from the rod and the “pooch” helps the quilt hang flat. Photo by Barb Gorges.

Quilt Hanging: How to Help Your Quilt Live to 100, Part 7

By Barb Gorges

Over the last 30 years the quilting community has developed a nearly standardized tube-type sleeve for hanging quilts, protecting the quilt from the rod, and with less distortion.

Perhaps using leftover fabric from the back of the quilt, piece a strip of fabric 9 inches wide and as long as the width of the quilt. If it is for a king-sized quilt, cut the length in half to make two sleeves, allowing for a middle rod support.

Hem the short edges by turning under ½ inch towards the wrong or right side, pressing, and turning under again. Stitch in place.

Match the two long edges with wrong sides together and stitch using a ½-inch seam allowance. Press this seam open and at the same time, flatten the tube so that the raw edge of one of the seam allowances is just a little short of one of the folds.

Rearrange the tube to press another parallel fold that is on the other side of the seam allowances, and 3 inches from the fold closest to the seam allowances.

On the quilt, mark a line across the back 1 to 2 inches below the top edge of the quilt, and another line 3 inches below the first line. Center the sleeve, matching the folds closest to the seam allowances with the lines and pin in place.

Use either a whip stitch or a large version of your favorite applique stitch to sew along the pinned folds, catching generous amounts of the quilt backing and batting. Also sew down the parts of the ends of the tube that are against the back of the quilt.

Use your imagination for ways to support the ends of the rod. A rod can be cut almost the width of the quilt to hide it, or a little longer, for insertion into decorative brackets.

Scroll down to read the first six parts of this series. More detailed sleeve instructions are available at this website, on the “Quilt Care Tips” page.

Light versus quilts

Fading

Two navy blue fabrics reacted differently to ultraviolet light from sunlight and artificial light over the last 20 years while on display only about one month per year. Photo by Barb Gorges.

Quilt Display: How to Help Your Quilt Live to 100, Part 6

By Barb Gorges

*Scroll down to see the first five parts of this series or click on the tab above for general quilt care information.

Spreading your quilts on beds is only one way to display them. Many of us drape quilts over other furniture (avoiding unsealed wood), fold and stack them on open shelves or hang them on the wall.

Quilts on display don’t get the same rough treatment as quilts used for warmth. Instead, light is the biggest problem. If you’ve replaced your windows with energy efficient, low e (low-emissivity) glass, you’ve somewhat reduced the fading problem caused by the ultraviolet wavelength in sunlight.

Artificial lighting also has UV rays. Fluorescent lighting is the worst. Look for products that can filter UV light.

It is inevitable that quilts will fade if they spend any time with enough light to be seen, and that is part of the charm of antique quilts. At least make sure your quilt doesn’t fade unevenly.

A quilt faded along an exposed fold looks worse than a quilt with overall fading. Refold those quilts on display often. Flip the quilt around so the same corner isn’t illuminated by the same sunbeam each day.

One recommendation, from www.museumtextiles.com, is to rotate quilts on display every 6 months. In a bright location, I think you should rotate them even more often. This is the justification you need to make lots of quilts—at least one for each season for each display location!

After light, dirt is the other issue for quilts on display: dust, pollution, household cleaning product fumes, pet hair, wood smoke, tobacco smoke, greasy cooking vapors. You may want to wash a quilt (a future topic) that has been on display for a while before rotating it into storage.

Next time I’ll discuss how to safely hang a quilt.

Use quilts gently

Frayed quilt edge

Pulling it up to your chin is hard on a quilt’s edge over time. Photo by Barb Gorges.

Quilt Use: How to Help Your Quilt Live to 100, Part 5

By Barb Gorges

The first four parts of this series examined quilt genetics—what materials and techniques make a strong quilt that might last a few generations. Now we’ll look at how a quilt’s lifestyle—the way you use it, affects its longevity.

Lying on a bed is a safe place for a quilt. No stress on seams, probably dim light, and temperatures comfortable for humans and textiles.

The lucky quilt is protected from jumping pets, stuff thrown on it and people sitting on it. But it’s hard to train family to flip back the quilt before sitting or packing a suitcase on it.

Bedmaking can be hard on a quilt if someone grabs the top edge and just pulls. It is better to lift the quilt into place instead of tugging.

Quilt with sheet

Protect the top edge of your quilt with a generous amount of sheet turned over it. Photo by Barb Gorges.

The top edge of a quilt also gets a lot of wear from the oils from our hands and faces, and the roughness of men’s beards. I like to make square quilts so the edges can be rotated. But the best protection is a generous amount of sheet turned over the quilt’s edge.

Long ago, housewives basted fabric “beard guards” over the top edge of a quilt. The ones I’ve seen cover maybe 6-10 inches on both front and back. I don’t know if they were left on until they were completely worn out, or if the industrious housewives took them off for washing on a regular basis.

Conservation of your quilt must be balanced with use and enjoyment. Some quilts are destined to be dragged by small children or spilled on while eating in front of the TV. Hopefully, those aren’t the ones you put much time into making.

If your quilt wears out prematurely from love and hard use, take that as a compliment.

How Quilt-making Material Choices Lengthen Quilt Life

split seam

The borders of my first quilted pillow were not properly quilted and with use, the strong polyester thread sawed through the cotton fabric, cutting off the seam allowance. The green fabric is a polyester blend. Photo by Barb Gorges.

How to Help Your Quilt Live to 100, Part 3

By Barb Gorges

In the previous post I discussed how antique quilts show us the benefits of choosing good quality fabrics in helping our quilts survive more than one generation, and how you can decide if a fabric is qualified to be in your quilt.

But quilt longevity genetics depends on more than quality fabric and a quilt care label (see previous blog postings). I found out the hard way that thread and fabric should be compatible.

Years ago I pieced cotton fabric with polyester thread when I made a quilted couch pillow that got a lot of hard use. The polyester thread, much stronger than the cotton fabric, sawed right through along the seam lines. With the seam allowances cut off, there was no way to repair the patchwork.

A few years later, I brought home tied patchwork quilts my mother had made for my sister and me when we were little. All of the diagonal seams had popped open because the thread used for piecing had broken. I was able to re-stitch the seams because the seam allowances were still intact. And then I added a lot more yarn ties so that the quilt top had more support from the backing and the diagonal seams wouldn’t be under so much stress.

Back when I started quilting in the 1970s, everything was tied or quilted by hand and we were always trying to get away with the least amount of quilting so we could start new projects. Remembering my mom’s tied quilts, I told students to always use cotton thread for piecing cotton fabrics.

But now, with the advent of copious machine quilting, there is very little chance that patchwork seams will ever flex enough to come undone, so it might not matter if your thread and fabric are of the same substance, or the piecing thread is stronger than the fabric.

However, I do have reservations about using plastic in quilts. Polyester and all its cousins are everywhere in quilting: thread, trims, batting. The woman I learned to hand quilt from made lots of polyester double-knit quilts because everyone kept giving her fabric they found to be not very comfortable to wear—it didn’t breathe. We joked that her quilts would never disintegrate like cotton and in the distant future, archeologists will find only her quilts.

But I’m not so sure plastic materials will age that well. Some get brittle. Some turn yellow. Some get sticky. And that’s before being subjected to attic temperatures. I already know that polyester batting in a quilt used nightly for a number of years completely loses its loft. And I’m not sure the pilling problem—little polyester batting fibers poking through to the quilt surface and then tying themselves together in knotty pills—has been solved, though copious quilting might keep the batting from rubbing against the fabrics and poking through as much.

The biggest reason for using natural fibers for quilt batting—silk, wool and cotton (I don’t count bamboo because it is more like polyester) is breathability. In these discussions on what will help your bed quilt live to be 100 years old, comfort—as well as appearance—matter a lot. You want the next owners to keep your quilt for themselves instead of giving it to the dog if they don’t like it.

I’m also concerned about quilt-making aids that add chemicals to your quilt that are not washed out when the quilt is finished. Fusibles come to mind. I think they are great for fun wall hangings that you don’t expect to live that long. Fabric paints and markers fall in the same category, as do most non-fabric embellishments. There’s just no telling yet how some of these things will age.

I’m reminded of the time I was able to see some of Grandma Moses’s original artwork when it was on exhibit in Washington, D.C. She had decided to embellish her snow scenes with salt to make them sparkle. Except over the years all the added “snow” turned black.

Don’t hesitate to experiment with all the latest quilt-making aids. But when it comes to your heirloom-worthy quilt, ask yourself, “What did Great-Grandma do? How do her quilts look 100 years later?”

How Labels can Lengthen Quilt Life

Gorges Quilt Labels Quilt Care Label

A GQL Quilt Care Label sewn to a back corner of this quilt, plus the identification label, may help it be valued and taken care of by future owners. Photo by Barb Gorges.

By Barb Gorges

We quilters are regularly reminded to label our quilts or to at least embroider our name and the date in a corner. We’re more likely to do it if we are giving the quilt away. It seems silly if the quilt is the one I’m using every night or that hangs on my wall.

But seriously, it’s hard to know when you and your quilt may be parted. It’s better to make signing your quilt a regular step in your finishing process.

Labels are nice because you can add more information about you and the quilt using fine point permanent ink. Or use a computer and printer to print on fabric.

Some of the information you may want to include is: your name, the date, your location, name of the quilt, size, pattern, inspiration, and the occasion for making the quilt (wedding, baby, graduation, etc.). Maybe add a note about fiber content, especially that of the batting. Don’t forget to add the name of the quilter if it wasn’t you. On quilts that will be exhibited, I also put my address and phone number.

If you’ve ever had a vintage quilt appraised, you know it is more valuable if there is information about the quilter and the quilt, so label your quilts for the sake of your heirs—and to impress them with the value. Perhaps it will help them treasure your quilts more.

In addition to quilt and maker information, it’s good to have quilt care instructions. Thirty years ago, I was making lots of quilted pillows and placemat sets (hand quilted!) for friends and relatives getting married or graduating and I was pretty sure they didn’t know how to wash quilted things safely.

I made “hang tags” out of cardstock, writing out washing directions and pinning them to the gifts. You can imagine as soon as the recipient unpinned them, the directions were not filed by the washing machine. So I started printing brief care directions at the bottom of each label.

Printing with permanent ink on fabric, no matter how fine the point, takes a lot of room. But one day I said “Eureka!” when I realized a solution had already been invented. Care labels are in all of our clothes and linens. Why not make the same kind for home-made quilts?

My realization and subsequent research took place in 1998. Using a directory of manufacturers, I was able to find a company that could weave a 3 x 3-inch taffeta label with the basic quilt care information I thought was necessary: cleaning, display and storage. I was going to make some just for me, but there was a good price break at 10,000 and I thought I might sell some to other quilters.

I have since sold more than 60,000 Gorges Quilt Care Labels—in all 50 states and a few other countries. I have loyal customers who buy a package of a dozen at a time.

But I am surprised the labels don’t sell better. Part of it is I can’t afford glossy ads in magazines for an item that sells for so little. Part of it is that I’m selling something quilters don’t need until they finish a quilt. And you know how many unfinished quilts we all have!

Part of it might be that a quilter has read the care information on the label, but doesn’t agree it is the best information.

But actually, I think quilters have faith that the person receiving the quilt will know how to take care of it. Really?! I just heard another horror story during Quilt Wyoming 2014 about another handmade quilt inadvertently ruined by the recipient.

Most of my customers are putting the quilt care labels on quilts they give away. But why not put them on quilts at your own house? Remember, some day you may not be there to protect your quilts. Even if you are still alive.